Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation

Experiments were conducted to evaluate the utility of a new processing procedure developed for Mg-based alloys in which samples are subjected to a two-step processing route of extrusion followed by equal-channel angular pressing (designated as EX-ECAP). The experiments were conducted using a Mg-0.6 wt pct Zr alloy and, for comparison purposes, samples of pure Mg. It is shown that the potential for successfully using ECAP increases in both materials when adopting the EX-ECAP procedure. For the Mg-Zr alloy, the use of EX-ECAP produces a grain size of ∼1.4 μm when the pressing is undertaken at 573 K. By contrast, using EX-ECAP with pure Mg at 573 K produces a grain size of ∼26 μm. Tensile testing of the Mg-Zr alloy at 523 and 573 K after processing by EX-ECAP revealed the occurrence of significantly enhanced ductilities with maximum elongations of ∼300 to 400 pct.     

Effect of atomic oxygen exposure on bubble formation in aluminum alloy

In order to investigate the effect of atomic oxygen exposure of an aluminum alloy on bubble formation during welding, electron beam welding was performed on the samples exposed to atomic oxygen produced by the oxygen plasma method. The change in the aluminum surface due to the exposure was analyzed by auger electron spectroscopy. Due to the exposure of atomic oxygen, the thickness of the aluminum oxide film increases on the surface, and pores are formed during welding. The pores can be formed by the formation of the Al₂O gas through the reaction between the aluminum oxide and aluminum in a high vacuum.     

A fibre-optic 3-D microscope with high depth sensitivity

A new fibre-optic microscope with high depth resolution is proposed and experimentally realized. In this microscope, a pair of monomode optical fibre couplers are used to form a six-port all-fibre Michelson interferometer. A lock-in amplifier is used to improve the depth sensitivity and to simplify the optical and electronic circuits. The phase sensing signal is applied to a mirror at one arm of the interferometer. The optimum resolution was about 0?4 nm. The transverse resolution of this microscope is determined by the core diameter of the monomode fibre (9 μm). This 3-D microscope is quite stable to ambient mechanical disturbances, and can be applied to the 3-D microscopy of various biological objects.     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.     

Evaluation of Young’s modulus of imprinted hydrogen silsesquioxane pillar after residual layer removal by reactive ion etching

Nanoimprint lithography has two basic steps. The first is the imprint step in which a mold with nanostructures on its surface is pressed into a resin film on a substrate, followed by removal of the mold. The second step is the residual layer removal by a reactive ion etching (RIE). There is no report whether the properties of the imprinted structure after RIE change or not. In this work, the authors evaluated the Young’s modulus of the imprinted pillar after residual layer removal by RIE. In this experiment, hydrogen silsesquioxane (HSQ), a type of spin-on-glass, was used as an imprint material. The residual layer was etched by RIE using CHF₃ gas. The Young’s modulus of imprinted pillar after RIE was measured via cantilever method. The Young’s modulus of HSQ pillar after RIE was twice as much as that of HSQ pillar before RIE. From the Fourier transform infrared measurement, it was founds the chemical structure of HSQ was changed by forming network structure due to heating by RIE plasma energy. These results indicate that the mechanical property of imprinted structure was changed in the residual layer removal step by using RIE.     

Analysis of Energy Saving and Environmental Characteristics of Electric Vehicles in Regionally Disaggregated World Energy Model

This paper investigates the impact of an extensive introduction of electric vehicles (EV) and plug‐in hybrid vehicles (PHEV) into the global energy system by 2050. The significant growth of automobile ownership in emerging countries is likely to increase world oil demand and the associated carbon dioxide emissions. In order to address these energy, security, and environmental concerns, the deployment of clean energy vehicles, such as EV and PHEV, is expected to play a crucial role due to their high fuel efficiency. Consequently, we develop both a global energy system model and a world vehicle penetration model, which can explicitly analyze the impact of EV introduction into the seasonal daily electric load curve, with consideration of the specific electricity charging profile through 2050. The simulation results confirm that EV deployment contributes to energy conservation, because oil demand reduction outstrips the growth in electricity demand and the associated fuel input into the power generation mix. Concerning carbon dioxide abatement, the magnitude of the impact relies on the carbon intensity of the power generation mix. If the intensity is low enough to guarantee a carbon mitigation effect due to EV fuel saving, emissions reduction is well assured. It should be noted, however, that in regions with high carbon intensity in the power generation mix, carbon emissions per mileage of EVs is almost equivalent to that of efficient gasoline vehicles such as hybrid vehicles, and the figure for PHEV is slightly higher than for hybrid vehicles. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 20–36, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22373     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.